Series V100 Ball Valve

[ Điểm đánh giá5/5 ]1 người đã bình chọn

Đã xem: 1537 | Cật nhập lần cuối: 1/31/2016 7:40:01 AM | RSS

Available in 2 thru 12 inch sizes

The CVS V100 Ball valve design utilizes a standard ball with a triangular shaped wedge formed in it.

Excellent Flow Control:

This design allows for both throttling control and on/off service used in conjunction with a variety of actuators.

The CVS V100 valve design closes against one of several available ball seals with a shearing action. The CVS V100 is a flangeless design and allows the valve body to fit between two exiting flanges. The flow characteristic is modified equal percent, with normal (forward) flow into the convex side of the Ball.

Bi-directional flow is into either side of the V-Ball. TCM ball seal, metal ball seal and flow-ring construction can be used in Bi-directional flow.

Typical actuators used are the pneumatic spring and diaphragm rotary actuator (CVS1051) and the pneumatic piston rotary actuator (CVS1061). Mounting of these actuators can be on the right-hand or left-hand side viewed from the forward flow inlet.

Valve bodies are available in LCC, WCB and 316sst material.